TDFJ-160 Desk-top automatic container capping machine cans sealing machine,paper cans PET plastic tank cover pot metal machine

Production capacity: 15 times / minute

Adaptation: tank diameter: φ45-φ150mm tank height: 39-200mm

Spindle speed: 620V / min Motor: YB02-4 0.37KW

Overall dimensions: 600 × 320 × 700mm

Speed motor: 40W

Total equipment weight: 60Kg

 

 

1. Preparation before boot.

⑴ check the various components are lubricated.

⑵ check whether the loose firmware, power cord with or without damage.

⑶ check the rotating system and the movement of institutions with no fault and abnormal sound.

 

2.Adjustment Press the jog switch slowly adjust, screw down the screw, adjust to the desired height of the jar. Sealing tank to go through the first road roller and two rolling roll to complete, adjust the roller position, you can get the required position roller seal.

 

3. boot seal cans

⑴ start the motor, the jar will be filled with good material cover lid.

⑵ will be Jars on the can sealing machine under the mold, and the canister righting.

⑶ confirm the jar placed in the right position, the lid cover is correct, you can step on the foot switch seal cans.

 

4. Stop press the power button

 

 

 

1. When moving the sealing and sealing machine, three or more people must be allowed to ensure safety. 2. Do not pull and squeeze the power cord.

3. The body is strictly prohibited the use of water rinse (only use a damp cloth wipe test).

4. Do not hit gland touch.

5. Normal production, are not allowed to adjust the pressure roller and so on.

 

1. Surface wipe: wipe the surface of the device clean, not placed material.

2. Equipment Fasteners: Equipment, the firmware inspection

 

Check fastening, refueling lubrication.

3. Roller best daily planing time.